Contact Us Shop
SSQ header

SSQ™ MultiPro Roof Panel Machine – Features

15 Quick Change Profiles…One Machine!
The most advanced…accurate…user-friendly, multi-profile, roof panel machine ever. Change tooling in 45 minutes or LESS with one wrench and no tape measure.

Standard Features:
• Polyurethane Drive Rollers
• Hydraulic Drive and Shear
• Push Button RUN/JOG Controls at Entry and Exit Ends
• Quick Change™ Profile Roller System
• Quick Change™ Power-Pac™ – Gas or Electric
• One Pair of Bead, Pencil, Striation, or V-Rib Rollers
• Welded Tubular Steel Frame
• Panel Recognition Safety Proximity Sensor
• Length Control Limit Switch
• Power Interruption Safety Circuit
Field formed panels have demonstrated compliance with UL580, Class 90 when a UL certificate accompanies the machine producing panel
• Industry’s Best Warranty

SSQ™ MultiPro Roof Panel Machine – Specifications

SSQ Panel machine
Length 14’ 4” (4.1m)
Width 5’ (1.5m)
Height 4’ 3” (1.3m) w/ Over Head Rack
1’ 10” (.6m) w/o Over Head Rack
Weight 3700 lbs. (1700kg)
____________________________________________________________________

SSQ On Trailer

Length 17’6” (5.3m)
Width 7’ (2.1m)
Height 6’3” (1.9m) with reel
Weight 4800 lbs. (2200kg)
____________________________________________________________________
Speed

75 ft/min (23m/min) Approx.
____________________________________________________________________
Shear

• Hydraulically Powered, Infinitely Adjustable, Hardened Tool Steel Blades and Dies• Panel Recognition Safety Proximity Sensor
Drive
16 Polyurethane drive rollers, hydraulically driven via chain, sprocket and gear
____________________________________________________________________
Coil Width

15″ to 30″ (380mm to 760mm) (30” coil requires remote decoiler or expandable reel)
____________________________________________________________________
Materials Formed
Painted Steel 28 ga. to 22 ga. (.4mm to .8mm) (painted, galvanized, aluminized)
Painted Aluminum .027” to .040” (.7mm to 1.0mm)
Copper 16 oz. to 20 oz. 3/4 Hard (.5mm to .7mm)
Terne Coat Stainless 26 ga. (.5mm)

Click the view profile link to download the PDF version of the profile for the machine that you’re interested in.

                            ↓


SSQ
Roof Panel Machine 

SSH
Roof Panel Machine 

SSR
MulitPro Jr. Roof Panel Machine 

FWM
Flush Wall Machine 

5VC
5-V Crimp Machine 

TRQ250
View Profile Not available on this machine Not available on this machine  Not available on this machine  Not available on this machine

SSQ275
View Profile Not available on this machine Not available on this machine  Not available on this machine  Not available on this machine

FWQ 100
(Flush wall-SSQ) 
View Profile  Not available on this machine  Not available on this machine Not available on this machine Not available on this machine

FWQ150
(Flush wall-SSQ) 
 View Profile  Not available on this machine  Not available on this machine  Not available on this machine  Not available on this machine

SS100
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

SS150
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

SS200
View Profile  Not available on this machine  Not available on this machine  Not available on this machine  Not available on this machine

SS210A
View Profile  Not available on this machine  Not available on this machine  Not available on this machine  Not available on this machine

SS450
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

SS450 SL
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

SS550
View Profile  Not available on this machine  Not available on this machine  Not available on this machine  Not available on this machine

SS675
View Profile  Not available on this machine  Not available on this machine  Not available on this machine  Not available on this machine

FF100
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

FF150
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

BP 1″
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

BP 1-1/2″
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

T PAN
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

FW1
(Only for FWM)
 Not available on this machine  Not available on this machine  Not available on this machine View Profile  Not available on this machine

FW1 with Perf
(Only for FWM)
 Not available on this machine  Not available on this machine  Not available on this machine View Profile  Not available on this machine

FW1 with Under Deck
(Only for FWM)
 Not available on this machine  Not available on this machine  Not available on this machine View Profile  Not available on this machine

Bead Ribs
View Profile View Profile View Profile View Profile  Not available on this machine

Pencil Ribs
View Profile View Profile View Profile View Profile  Not available on this machine

V-Ribs
View Profile View Profile View Profile View Profile  Not available on this machine

Striation Ribs
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

Clip Relief
View Profile View Profile View Profile  Not available on this machine  Not available on this machine

5V Crimp 21″
 Not available on this machine  Not available on this machine  Not available on this machine  Not available on this machine View Profile

5V Crimp 24″
 Not available on this machine  Not available on this machine  Not available on this machine  Not available on this machine View Profile

5V Crimp 24½”
 Not available on this machine  Not available on this machine  Not available on this machine  Not available on this machine View Profile

SSQ™ MultiPro – Roof Panel Machine – Options

FWQ Flush Wall / Soffit / Underdeck Profile
AVAILABLE NOW for the SSQ Roof Panel Machine! This unique new flush
wall profile is not available on any other portable rollforming machine.
It offers easily adjustable reveal from 0″ to 3″.  Runs up to 22 gauge.
Accommodates Hot Melt Technologies sealant system.
_____________________________________________________________________
TR12 Trailer
NATM Compliant, 12,000 lb. tandem axle trailer used for towing any NTM roofing machine directly to the jobsite. Equipped with crane lifting eyes, 4 drop-foot jack stands and electric brakes w/ breakaway kit.
___________________________________________________________DR1 – Dual Overhead Reel StandMachine mount overhead stand for holding up to two Expandable Arbors with coil or two De-coiler Reels with coil for a combined total capacity of 6,000 lbs.
___________________________________________________________
DR01-EX – Expandable Arbor
Used for holding coil. This arbor expands to the inside diameter of the coil for faster, easier loading. Can accommodate coils with 16” to 20” ID. Capacity is 3,000 lbs. when used with Dual Overhead Reel Stand or Single Free Standing De-Coiler.
___________________________________________________________

QCPP-E & QCPP-G
– Quick Change Power Pack
Used to quickly field convert machine from gas engine to electric motor and back again as needed.

___________________________________________________________
GAS 16 Hp Electric Start Engine
___________________________________________________________

ELEC1
7.5 Hp, 220VAC, 60Hz, 3Ph, 18Amps
___________________________________________________________

ELEC3 5 Hp, 380VAC, 50 Hz, 3Ph, 8 Amps
___________________________________________________________

ELEC4 7.5 Hp, 460VAC, 60 Hz, 3Ph, 9 Amps
___________________________________________________________

ELEC5 5 Hp, 220VAC, 50 Hz, 1Ph, 21 Amps
___________________________________________________________

ELEC6 5 Hp, 220VAC, 60 Hz, 1Ph, 20 Amps
PLC09 – Computer Control
New Tech Machinery’s new computer controller was developed after years of customer feedback.  The controller integrates a myriad of options and features that end users have requested.  Operation of the controller is designed for simplicity, with help and error screens to assist the user.


Key Features

  • Water Resistant Carrying Case
  • Easy Touch Screen Operation with Adjustable Brightness
  • Program up to 99 Jobs or Lengths
  • Calibrate on the Fly
  • Calibrate using a part run from a programmed job to save coil
  • Password protection
  • Separate supervisor and user permissions to track machine and coil usage
  • Track Material
  • Totalizing counter with password protected reset
  • Track 3 separate coils differentiated by color with password protection capability
  • Integrated Coil Length Calculator
  • Measure the coil dimensions and calculate the approximate length
  • Auxiliary Shearing
  • Help and Error Screens
    Click here to view the Computer Controller video:
    ____________________________________________________________

DRC09 – Computer Control
Program 50 different lengths with quantities from 1 to 999. Machine will automatically run, measure, cut and re-start after panel is removed from shear.
___________________________________________________________
FSD1
– Single Free Standing De-Coiler
A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. Total capacity 3,000 lbs.Shown with optional DR01-EX
___________________________________________________________
HMT
– Hot Melt Sealant Pump Interface
___________________________________________________________
ROS-10

Ten Ft. (3m) Sections of Variable Height Run Out Table

___________________________________________________________
RR1 thru RR6
– Pencil, Bead, V and Striation Rollers
A variety of ribs used to aesthetically enhance standing seam panels.
___________________________________________________________
CVR-SSQ – 
Machine Cover
Machine Cover K-Tex synthetic canvas material,
form fitted to body of machine.

SSQ™ MultiPro Roof Panel Machine – Brochure

 

SSQ Roof Panel Machine Brochure. PDF

 

The Best of Metalcon • New Tech Machinery: Trapezoidal Profile from Shaun Clearie on Vimeo.

The TRQ250 Trapezoid Panel Profile

AVAILABLE SOON!
BRAND NEW for New Tech Machinery- this panel profile fits into our SSQ roof panel machine!

 Click here to learn more about the SSQ ROOF PANEL MACHINE

    • 2.5″ tall structural panel for low slope applications
    • Fits in new and existing SSQ roof panel machines (runs up to 22 gauge steel)
    • Great for commercial and industrial projects
    • Features anti-capillary leg

Click Here for TRQ250 Load Tables Information

 The SSQ275 New Lock Panel Program:
The Proprietary Panel System that
Can Be Snap-Locked and Seamed!

 

The SSQ275 New Lock Panel Program:

What is the SSQ275?

The SSQ275 is a 2″ tall panel that combines technology from the 2″ Mechanical Profile and the 1.75″ Snap Lock

Just launched at METALCON 2014, New Tech Machinery announces a BRAND NEW Proprietary Panel System that can be snap-locked and seamed! We are very proud to announce our latest innovation, the SSQ NEW LOCK 275 PANEL PROGRAM! We’ve partnered with our long-time trusted distributor, Texas-based Karr’s Building Supply (KBS), in this new venture! This panel program will include testing and licensing which can be passed on to end-users. We also offer an Installation and Detail Manual for this panel program.  

Click here for the SSQ275 Brochure

• Proprietary Panel System
Can be snap-locked and mechanically seamed

• Fits in new and existing SSQ roof panel machines
• Added seam strength due to snap-lock design

•Licensing Agreement Valid for 3 years
• 2″ tall finished panel
• Ease of installation
• Only available through NTM or KBS
• ASTM and UL testing available

 

 

 

 

 

 

 

Patent(s) Pending

News & Events
  • EZ-Counter Computerized Length Controller NOW AVAILABLE!

    New Tech Machinery now offers a computerized Length Controller for the MACH II gutter machine. Can be retrofitted to existing machines. Separate Computer controller available for roof panel machines too!
  • NTM In the Metal Roofing Magazine Idea Book

    New Tech Machinery's Tapered Panel and Tapered Slitter Machines were recently used in a beautiful metal roofing project.
  • Third GutterArt™ Pattern Now Available!

    The third GutterArt™ pattern has been designed and named! It will be called “Stars & Stripes” and will join “Ashley” and “Aztec” as New Tech Machinery’s third GutterArt™ pattern.
  • New Tech Machinery Begins International Expansion

    New Tech Machinery is expanding into international markets to reach more clients in more places. More franchising opportunities will soon be available to international distributors

More…

Machine Videos