| TRN |
Turnstile Reel
Stand
Machine mounted stand for holding reeled coils of material.
Rotates 360 degrees for ease of loading. Machine capacity
is 3 total. |
RL-15
&
RL-20 |
Reels 15”
or 20” ID
Adjustable width reels will accept
11 7/8” or 15” wide material for 5”
or 6” gutter. Capacity 1,000lb. |
| ROS1 |
Run Out Stand
Supports gutter as it runs out of machine. Tripod style
stands with 1 adjustable leg for leveling and conveyor
roller to support gutter. One stand recommend for every
20’ of gutter. Adjustable in height from 31 ½”
to 45”.
|
| RAC |
Transfer Rack
Used to transfer loaded coils from one turnstile reel
stand to the other. (1 set / machine needed)
|
| SH5 & SH6 |
Geared Shear
Mechanically advantaged forward pulling shear for cutting
5” & 6” gutter to length.
|
| GFI |
Ground Fault Interruption Plug
|
|
| CR5-5/6 |
Coil Cradle
Used to hold full or partial coils for 5” and 6”
gutter. Can be machine or floor mounted. Capacity 700lbs. |
HK5,
6 & 5/6 |
Alcoa Hook
Forms a 5/16” hook on the back of the gutter for
use with free float hanger system. Also accommodates standard
hangers or spike ferrule. |
BF 1-5
thru
BF15-6 |
Back Flange 1”
and 1 ½”
Forms 1” or 1 ½” flange on back of
5” or 6”gutter eliminating the need for flashing.
Used with 5” or 6” machine only.
|
BF 5SH
thru
BF15-6H |
Back Flange Shear
Mechanically advantaged forward pulling shear for cutting
5” and 6” back flange gutter to length. |
| 12V |
12 Volt Electrical
System
DC Motor and control to allow operation of machine with
12volt battery. (Battery not included). |
BB5
& BB6 |
Bottom Bead Assembly
Adds unique design to bottom of gutter.
|
| ELEC1 |
3/4 Hp, 110VAC, 60Hz, 1Ph, 11Amps
|
| ELEC2 |
3/4 Hp, 110VAC, 50Hz, 1Ph, 11Amps
|
| ELEC3 |
3/4 Hp, 230VAC, 50Hz, 1Ph, 5Amps
|
| ELEC1 |
1 Hp, 12VDC, 80Amps
|
|
