| ROS-10 |
Run Out
Table
Conveyer style table attaches to shear and is used
to support panel as it exits the machine. Two individually
adjustable legs allow variation in height from 25”
to 43”. Available in connectable 10 ft. sections.
|
EZE
CHANGE™
ROLLER
SYSTEM |
Forming stations mounted on aluminum
rails used to form various panel profiles. Includes
shear dies. |
| DR01-EX |
Expandable
Arbor
Used for holding coil. This arbor expands to the inside
diameter of the coil for faster, easier loading. Can
accommodate coils with 16” to 20” ID.
Capacity is 3,000 lbs. when used with Dual Overhead
Reel Stand or Single Free Standing De-Coiler.
|
DR01-16
OR 20 |
De-Coiler
Reel
Two-piece reel with a fixed diameter used for holding
coils. Available for 16” or 20” ID. Capacity
3,000 lbs. when used with Dual Overhead Reel Stand
or Single Free Standing De-Coiler. |
| TR12 |
Trailer
NATM Compliant, 12,000 lb. tandem axle trailer used
for towing any NTM roofing machine directly to the
jobsite. Equipped with crane lifting eyes, 4 drop-foot
jack stands and electric brakes w/ breakaway kit.
|
| DR1 |
Dual Overhead
Reel Stand
Machine mount overhead stand for holding up to two
Expandable Arbors with coil or two De-coiler Reels
with coil for a combined total capacity of 6,000 lbs.
|
|
| FSD1 |
Single Free
Standing De-Coiler
A Remote stand used at the entry end of the machine
to hold one Expandable Arbor with coil or one De-Coiler
Reel with coil. Total capacity 3,000 lbs.
Shown with optional DR01-EX
|
| CR |
Clip Relief
Rollers
Used to help hide screws and bases of clips by forming
an offset down both corners of the panel. |
| HS-1 |
Hand Seamer
Hand held device used to single-lock mechanically
seamed panels.
|
| HMT |
Hot Melt
Interface
Electro/mechanical interface for Hot Melt Technologies
sealant injection system. Used to inject sealant into
female leg of panel as it exits the shear |
RR1
thru
RR6 |
Pencil, Bead,
V and Straition Rollers
A variety of ribs used to aesthetically enhance standing
seam panels. |
| RRF |
Frame Assembly
Used to mount additional rib or striation rollers
making changeovers fast and simple. |
QCPP-E
&
QCPP-G |
Quick Change
Power Pack
Used to quickly field convert SSH or FWM machine from
gas engine to electric motor and back again as needed.
|
|
