| DRC01 |
Computer Control
Program 50 different lengths with quantities from 1 to
999. Machine will automatically run, measure, cut and
re-start after panel is removed from shear.
|
| ROS-1 |
Run Out Table
Conveyer style table attaches to shear and is used to
support panel as it exits the machine. Two individually
adjustable legs allow variation in height from 25”
to 43”. Available in connectable 10 ft. sections. |
SSP
ROLLER
SYSTEMS |
Forming stations mounted on aluminum rails
used to form various panel profiles. Includes shear dies.
|
| DR01-EX |
Expandable Arbor
Used for holding coil. This arbor expands to the inside
diameter of the coil for faster, easier loading. Can accommodate
coils with 16” to 20” ID. Capacity is 3,000
lbs. when used with Dual Overhead Reel Stand or Single
Free Standing De-Coiler.
|
DR01-16
OR 20
|
De-Coiler Reel
Two-piece reel with a fixed diameter used for holding
coils. Available for 16” or 20” ID. Capacity
3,000 lbs. when used with Dual Overhead Reel Stand or
Single Free Standing De-Coiler. |
| TR12 |
Trailer
NATM Compliant, 12,000 lb. tandem axle trailer used for
towing any NTM roofing machine directly to the jobsite.
Equipped with crane lifting eyes, 4 drop-foot jack stands
and electric brakes w/ breakaway kit.
|
| CVR |
Machine Cover
K-Tex synthetic canvas material, form fitted to body of machine.
|
|
| DR1 |
Dual Overhead
Reel Stand
Machine mount overhead stand for holding up to two Expandable
Arbors with coil or two De-coiler Reels with coil for
a combined total capacity of 6,000 lbs.
|
| FSD1 |
Single Free Standing
De-Coiler
A Remote stand used at the entry end of the machine to
hold one Expandable Arbor with coil or one De-Coiler Reel
with coil. Total capacity 3,000 lbs.
Shown with optional DR01-EX
|
| CR |
Clip Relief Rollers
Used to help hide screws and bases of clips by forming
an offset down both corners of the panel. |
HS-1
&
HS-2 |
Hand Seamer
Hand held device used to single-lock mechanically seamed
panels.
|
| HMT |
Hot Melt Interface
Electro/mechanical interface for Hot Melt Technologies
sealant injection system. Used to inject sealant into
female leg of panel as it exits the shear. |
RR1
thru
RR6 |
Pencil, Bead,
V and Straition Rollers
A variety of ribs used to aesthetically enhance standing
seam panels. |
| RRF |
Frame Assembly
Used to mount additional rib or striation rollers making
changeovers fast and simple. |
| ELEC1 |
7.5 Hp, 220VAC, 60Hz, 3Ph, 18Amps
|
| ELEC5 |
5 Hp, 220VAC, 50 or 60Hz, 1Ph, 30Amps
|
| GAS |
16 Hp Electric Start Engine
|
|
