| TR12 |
Trailer
NATM Compliant, 12,000 lb. tandem axle trailer used for
towing any NTM roofing machine directly to the jobsite.
Equipped with crane lifting eyes, 4 drop-foot jack stands
and electric brakes w/ breakaway kit.
|
| DR1 |
Dual Overhead
Reel Stand
Machine mount overhead stand for holding up to two Expandable
Arbors with coil or two De-coiler Reels with coil for
a combined total capacity of 6,000 lbs.
|
| DR01-EX |
Expandable Arbor
Used for holding coil. This arbor expands to the inside
diameter of the coil for faster, easier loading. Can accommodate
coils with 16” to 20” ID. Capacity is 3,000
lbs. when used with Dual Overhead Reel Stand or Single
Free Standing De-Coiler.
|
| CVR-SSQ |
Machine Cover
K-Tex synthetic canvas material, form fitted to body of machine.
|
|
| DRC09 |
Computer Control
Program 50 different lengths with quantities from 1 to
999. Machine will automatically run, measure, cut and
re-start after panel is removed from shear.
|
SSQ
ROLLER
SYSTEMS |
Forming stations mounted on aluminum rails
used to form various panel profiles. Includes shear dies.
|
| FSD1 |
Single Free Standing
De-Coiler
A Remote stand used at the entry end of the machine to
hold one Expandable Arbor with coil or one De-Coiler Reel
with coil. Total capacity 3,000 lbs.
Shown with optional DR01-EX
|
| HMT |
Hot Melt Sealant Pump Interface |
| ROS1 |
Ten Ft. (3m) Sections of Variable
Height Run Out Table |
| CR |
Clip Relief
Rollers
Used to help hide screws and bases of clips by forming
an offset down both corners of the panel. |
RR1
thru
RR6 |
Pencil, Bead,
V and Straition Rollers
A variety of ribs used to aesthetically enhance standing
seam panels. |
| ELEC1 |
7.5 Hp, 220VAC, 60Hz, 3Ph, 18Amps
|
| ELEC3 |
5 Hp, 380VAC, 50 Hz, 3Ph, 8 Amps
|
| ELEC4 |
7.5 Hp, 460VAC, 60 Hz, 3Ph, 9 Amps
|
| ELEC5 |
5 Hp, 220VAC, 50 Hz, 1Ph, 21 Amps
|
| ELEC6 |
5 Hp, 220VAC, 60 Hz, 1Ph, 20 Amps
|
| GAS |
16 Hp Electric Start Engine
|
|
