ROSR-10 – Run Out Table

Table attaches to shear and is used to support panel as it exits the machine. Adjustable leg allows variation in height from 25” to 43”. Available in connectable 10 ft. sections.
TR12 Trailer

NATM Compliant, 12,000 lb. tandem axle trailer used for towing any NTM roofing machine directly to the jobsite. Equipped with crane lifting eyes, 4 drop-foot jack stands and electric brakes w/ breakaway kit.
DR1 – Dual Overhead Reel Stand

Machine mount overhead stand for holding up to two Expandable Arbors with coil or two De-coiler Reels with coil for a combined total capacity of 6,000 lbs.
DR01-EX – Expandable Arbor

Used for holding coil. This arbor expands to the inside diameter of the coil for faster, easier loading. Can accommodate coils with 16” to 20” ID. Capacity is 3,000 lbs. when used with Dual Overhead Reel Stand or Single Free Standing De-Coiler.
EZ-Counter Computerized Length Controller
FSD1 – Single Free Standing De-Coiler

A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. Total capacity 3,000 lbs.Shown with optional DR01-EX.
HS-1 – Hand Seamer

Hand held device used to single-lock mechanically seamed panels.
RR1 thru RR6 – Pencil, Bead, V and Striation Rollers

A variety of ribs used to aesthetically enhance standing seam panels.
CVR-SSR – Machine Cover

Machine Cover K-Tex synthetic canvas material, form fitted to body of machine.
EZE CHANGETM Roller System
Forming stations mounted on aluminum rails used to form various panel profiles. Includes shear dies.
RRF – Frame Assembly
Used to mount additional rib or striation rollers making changeovers fast and simple.
ELEC1 1.5 Hp, 120VAC, 60Hz, 1Ph, 18Amps
ELEC2 1.5 Hp, 220VAC, 60Hz, 1Ph, 9Amps
ELEC3 1.5 Hp, 220VAC, 50 Hz, 1Ph, 8 Amps