1-800-574-1717
Info@NewTechMachinery.com
 

 

Menu

New Tech Machinery: The World's Finest Portable Rollforming Equipment

 

One Step

Gutter material: 26 ga. steel (painted, Galvalume, galvanized, aluminized, ternecoat), .032” aluminum, 16 oz. copper 3/4 hard

 

Gutter size: 5” and 6”

 

Machines that make this profile: Nasser

 

 

 

 

 

Box Bottom

Gutter material: 26 ga. steel (painted, Galvalume, galvanized, aluminized, ternecoat), .032” aluminum, 16 oz. copper 3/4 hard

 

Gutter size: 5” and 6”

 

Machines that make this profile: Nasser

 

 

 

 

 

Colonial

Gutter material: 26 ga. steel (painted, Galvalume, galvanized, aluminized, ternecoat), .032” aluminum, 16 oz. copper 3/4 hard

 

Gutter size: 5” and 6”

 

Machines that make this profile: Nasser

 

 

 

 

Two Step

Gutter material: 26 ga. steel (painted, Galvalume, galvanized, aluminized, ternecoat), .032” aluminum, 16 oz. copper 3/4 hard

 

Gutter size: 5” and 6”

 

Machines that make this profile: Nasser

 

 

 

 

 

Quad Step

Gutter material: 26 ga. steel (painted, Galvalume, galvanized, aluminized, ternecoat), .032” aluminum, 16 oz. copper 3/4 hard

 

Gutter size: 5” and 6”

 

Machines that make this profile: Nasser

 

 

 

 

 

Triple Cove

Gutter material: 26 ga. steel (painted, Galvalume, galvanized, aluminized, ternecoat), .032” aluminum, 16 oz. copper 3/4 hard

 

Gutter size: 5” and 6”

 

Machines that make this profile: Nasser

 

 

 

 

Inset Step

Gutter material: 26 ga. steel (painted, Galvalume, galvanized, aluminized, ternecoat), .032” aluminum, 16 oz. copper 3/4 hard

 

Gutter size: 5” and 6”

 

Machines that make this profile: Nasser

 

 

 

 

 

Crown Mold

Gutter material: 26 ga. steel (painted, Galvalume, galvanized, aluminized, ternecoat), .032” aluminum, 16 oz. copper 3/4 hard

 

Gutter size: 5” and 6”

 

Machines that make this profile: Nasser

 

 

 

 

 

 

 


Profile Disclaimer: New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.