MACH II^™ 5", 6", & 5"/6" Gutter Machines

• Polyurethane Drive Rollers
• Two 360° Rotatable Reel Stands for Easy Coil Loading
• Stainless Steel Forming Rollers
• Electric Motor 3/4 HP, 110 VAC, 60 Hz, 1 Ph, 11 AMPs
• Push Button RUN/JOG Controls at Entry & Exit Ends
• Welded Tubular Steel Frame
• Forward Pulling, Easy Cut Shear for Accuracy
• Industry’s Best Warranty
• Power Interruption Safety Circuit
• Easy Lift Reels

5” Gutter Machine

• Length: 8’ (2.4m)
• Width: 2’ (.6m)
• Height: 3’ 10” (1.2m)
• Weight: 1,000 lbs. (454kg)

 

6” Gutter Machine

• Length: 10’ (3.0m)
• Width: 2’ (.6m) Plus Shear Handle
• Height: 3’ 10” (1.2m)
• Weight: 1,250 lbs. (570kg)

 

5"/6” Gutter Machine

• Length: 10’ (3.0m)
• Width: 2’ (.6m) Plus Shear Handle
• Height: 3’ 10” (1.2m)
• Weight: 1,350 lbs. (610kg)

 

Speed

• 50 ft./min (15m/min) Approx.

 

Materials Formed

• Painted Steel: 30 ga. to 24 ga. (.3mm to .6mm) (coated galvanized, aluminized)
• Painted Aluminum: .019" to .032" (.5mm to .8mm)
• Copper: 16 oz. to 20 oz. 3/4 Hard (.5mm to .7mm)

 

Shear

• Manually Powered
• Hardened Tool Steel Blades & Shear Dies

 

Material Width

• 5” Gutter: 11-3/4” to 12-3/8” (300mm to 315mm)
• 6” Gutter: 15” (380mm)

 

Drive

• Electrically Driven Polyurethane Rollers

MACH II Machine Profiles Cutsheet

---

MG5-SB5 - 5" with Straight Back

---

MG5-HK5 - 5" with Alcoa Hook

---

MG5-BB5 - 5" with Bottom Bead

---

MG5-BF5 - 5" with Back Flange

---

MG6-SB6 - 6" with Straight Back

---

MG6-HK6 - 6" with Alcoa Hook

---

MG6-BB6 - 6" with Bottom Bead

---

MG6-BF10 - 6" with Back Flange (1")

---

MG6-BF15 - 6" with Back Flange (1.5")

EZ-Counter Computerized Length Controller

EZ-Counter Computerized Length Controller for MACH II gutter machines. Complete with material tracking. Can be retro-fitted. Program up to 50 lengths, tracks material, offers miter options on all gutter machines, operate in feet and inches, inches only or centimeters. Operates as an Easy-touch screen.

---

TRN – Turnstile Reel Stand

Machine mounted stand for holding reeled coils of material. Rotates 360 degrees for ease of loading. Machine capacity is 3 total.

---

RL16 or RL20

Adjustable width reels for 11-3/4” through 15” wide coil for 5” or 6” gutters.

---

ROS1 – Run Out Stand

Supports gutter as it runs out of machine. Tripod style stands with 1 adjustable leg for leveling and conveyor roller to support gutter. One stand recommended for every 20’ of gutter. Adjustable in height from 31 ½” to 45”.

---

ROS – 3

Set of 3 run-out stands

---

RAC – Transfer Rack

Used to transfer loaded coils from one turnstile reel stand to the other. (1 set / machine needed)

---

SH5 – Geared Shear

Mechanically advantaged forward pulling shear for cutting 5” & 6” gutter to length.

---

CR5-5/6 – Coil Cradle

Used to hold full or partial coils for 5” and 6” gutter. Can be machine or floor mounted. Capacity 700lbs.

---

BF 1-5 thru BF15-6 – Back Flange 1” and 1-1/2”

Forms 1” or 1 ½” flange on back of 5” or 6”gutter eliminating the need for flashing. Used with 5” or 6” machine only.

---

BB5 & BB6 – Bottom Bead Assembly

Adds unique design to bottom of gutter.

---

Riser Pads

Riser pads to raise Mach II machines off of decking – available in 2 configurations: 6”-8” Riser Pads or 10”-12” Riser Pads.

---

CVR – Machine Cover

K-Tex synthetic canvas material, form fitted to body of machine.

---

HK5 – Alcoa Hook

Forms a 5/16” hook on the back of the gutter for use with free float hanger system. Also accommodates standard hangers or spike and ferrule.

---

BF 5SH thru BF15-6H – Back Flange Shear

Mechanically advantaged forward pulling shear for cutting 5” and 6” back flange gutter to length.

---

12V – 12 Volt Electrical System

DC Motor and control to allow operation of machine with 12 volt battery. (Battery not included).

---

ELEC1 3/4 Hp, 110VAC, 60Hz, 1Ph, 11Amps

---

ELEC2 3/4 Hp, 110VAC, 50Hz, 1Ph, 11Amps

---

ELEC3 3/4 Hp, 230VAC, 50Hz, 1Ph, 5Amps

---

ELEC1 1 Hp, 12VDC, 80Amps